Cut
Battery floor saw
FOUR ESSENTIALS. ONE ELECTRIC FLEET.
Cut the opening, compact the backfill, finish the surface and power the rest of your tools, all on one shared battery platform.
Battery floor saw
Battery power + breaker
Battery power + matched tools
Fill to the work specification
Rammer / plate compactor
Battery power + washer
Battery power supports the stages that need AC electricity; compatible packs also serve the cutting and compaction machines.

POWER CORE / POWER THE JOBSITE
Mobile power for jobsite tools

02 / CUT THE OPENING
Road cutting and floor work. Full 186 mm depth in one pass.

03 / COMPACT THE BACKFILL
Trench & backfill compaction

04 / COMPACT THE SURFACE
Granular bases & asphalt repair
The same Packs run the machines and the mobile AC supply. Swap them between tasks and charge around the crew's day.
One platform does not mean one battery runs everything at once. We size the Packs to what your crew runs at the same time.
NEXT, START WITH YOUR JOB
Tell us about the tasks, workload and power available. Let’s check the configuration together.
Reference runtimes: about 80 minutes per Pack for the rammer and plate compactor, and about 35 minutes at full depth for the floor saw on two Packs. Spare Packs on the Station let the crew swap and keep working. Tell us your daily workload and we will size the batteries and charging.
No engine means no exhaust from these machines and no engine noise. Normal dust control and ventilation for the work itself still apply.
In most cases, yes, if your tools fit within 5.5 kW running and 15 kW peak starting power. Send us the model numbers and we will confirm starting loads, voltage and outlets for your market.
No engine oil, air filters or spark plugs to change. Blades, compaction parts, drive and fasteners still need the routine checks in each manual, and batteries and chargers should be inspected regularly.